Cleaning Power and Convenience
Professional Coil Cleaner
Professional strength
All Purpose, Powder Kegs are good for all coil types
Foaming to penetrate deep into coils
Mix to desired strength
Each bag contains SIX premeasured 4oz kegs, making a total of 6 gallons of coil cleaner per bag.
That's six gallons of cleaner in an easy to carry 1.5lb pouch.
Instant Powder Kegs
- Inexspensive
- Easy to use
- Mix as needed
- No wasted product
- Easy to transport
- Won't spill in the Service Van
- Won't leak or separate
- Corrosion inhibitor
If you spill a powder keg in the service van, just sweep it up. It's not a big mess, like with premixed solutions
This product is easy to use:
Simply add one quick dissolving keg (premeasured 4oz) to a gallon sprayer, shake it thoroughly and you’re ready to clean any type of coil. Add more or less cleaning solution depending on the desired strength.
Safe for all coil types.
Instant Powder kegs are more than just convenient; they also have the professional strength cleaning power technicians need to get the job done.
Removes
Grease
Dirt
Hair
Dander
Other Debris
Saves
Shipping costs
Storage Space
Transport Hassles
Technical Data
Performance
Professional Coil Cleaner
24 oz. bag equals 6 gallons of cleaner
Removes grease, dirt, and other build up
Quick dissolving
Corrosion inhibitor helps prevent corrosion of metals
Good for all type of coils
Mixed “up” instead of diluted down
Ingredients
Corrosion inhibitor
Powerful grease removing cleaners
Foam producing product to help penetrate the coil structure
Physical Characteristics
White and green powder
Lightweight
Compact to save space
Will not separate
No leak hazard
Effectiveness
Instant Powder Kegs Remove
Dust
Dirt
Hair
Dander
Grease
Other Debris
Instructions
Instant Powder Kegs Dilution and Mixing Instructions
Instant Powder Kegs professional coil cleaner is easy to use. Each cloth bag of Instant Powder Kegs contain SIX 4 oz Kegs.
We've premeasured to make it easy for you
Mixing For Best Results
- Pour a single Keg into an empty one gallon sprayer
- Fill sprayer about halfway with water
- Close sprayer and shake to mix
- Add water to fill
- If you want to add an additional keg, go ahead
- Add one at a time and shake between additional kegs
- Wait a few moments and give it another good shake
- You're ready to go!
Note: It is normal for the mixture to heat up a bit as you add to and mix the solution.
Also pleasae allow for the mixture to fully dissolve, sprayers will not spray undissolved powder
The average coil take 1-2 Kegs to clean. It is better to clean two times with a mild solution, than once with a strong solution, due to the corrosive nature of coil cleaners