|
| |
| |
 |
Dirty Coils |
|
|
 |
Air passing through the coils
contains microscopic dirt particles, as well as other foreign material.
After a while, this debris builds up on the coil surfaces, making it
more difficult for the coils to provide cooling. This increases operational
costs. As an example, take a room with a brand new air conditioner.
Lets say you wish to cool it to 72 degrees when the initial room temperature
is 85 degrees. It may take half an hour to do so. A dirty coil is insulated,
and it takes longer to cool.
|
In the example given above,
it may take one hour to cool the same room with a dirty coil. This
uses up twice as much electricity. Unclean coils cause 1) equipment
to run longer giving it more wear and tear, and 2) use
up more energy than a clean coil, causing your energy costs to rise.
Air conditioners are among the single most energy consuming appliances
in a building. Dirty coils often restrict air flow, providing less
cool air to occupied room areas. Keeping coils clean is important,
and should be done as needed. Most cooling coils (evaporator coils)
are cleaned using an alkaline cleaner. Foaming coil cleaners are
usually selected because after applied, they can push dirt that is
trapped within the coils out of the interior surfaces of the coils.
A few manufacturers call alkaline cleaners “non-acid” cleaners
to make the user think that the product is non-corrosive to the aluminum
coil fins. However, this is not true. The American Society of Metals
Handbook shows both acid and alkaline materials cause corrosion of
aluminum. Therefore, any acidic or alkaline coil cleaner must be
rinsed off of the coils as soon as possible to avoid pitting corrosion
of coils. Coil cleaning can be a labor-intensive process. Our two
proven solutions for coils makes it easy to clean coils, and extend
the time between your scheduled cleanings.
|
|
|
| |
| |
 |
 |
|
|
| |
 |
The First powdered coil cleaner
asks the question "Why haul water?" Add our light weight
product to water at the jobsite instead. Forget about leaky gallons
or waste. INSTANT POWDER KEGS is portion controlled.
Good for all types of coils.
One package contains six separate "Kegs". You gain mixture strength
by adding bags to your water. You don't waste money like concentrated
coil cleaners by using too much right off the bat.
|
| |
And freight costs? Why pay an extra $1
gallon and more just to ship water. We thought you just might already
have water where you are. INSTANT POWDER KEGS™ are
so easy to use and carry. It will change the way you work. With INSTANT
POWDER KEGS™ storage problems are gone. One package
of 6 kegs equals a gallon of concentrate, and weighs only one and
a half pounds. It fits easily on a shelf, doesn't leak and doesn't
separate. Service etches can carry a "gallon" of coil cleaner
tried on their belt loop with no problem.
Shouldn't you be saving time and money with INSTANT POWDER
KEGS™? For additional help in keeping coils clean, see Coil Control above.
|
|
|
|
|
|
|
|
|
